Uni-Cote Hi Lite Render from Unitex: Insurance against the elements

You've put too much into the outside of your building to let it go to ruins in the wind, rain and sun.

Why risk damage to your building from the elements? Insure the exterior of your buildings with Uni-Cote Hi Lite Render from Unitex. Uni-Cote Hi Lite Render is a cement-based polymer-modified, high performance, water resistant and adhesion-promoting masonry render system.  Either trowel-applied or spray machine applied, Hi Lite Render is applied direct to sound and prepared masonry surfaces, .

A high build (that's the 'Hi' part) is easily and effectively achieved because the render is so lightweight (the Lite part). It can even achieve a uniform finish over difficult and uneven masonry surfaces, because the render can be rubbed up to form an even surface.

Uni-Cote Render products are dry powder-based products, which means that you are getting a 100% active product. All that is required is for clean water to be mixed in, on site, immediately prior to application. Easy, efficient and worth what it will save you in prevention alone, Uni-Cote Hi Lite Render is the ultimate home insurance.

PRODUCT

Uni-Cote Hi Lite Render

APPLICATIONS

Uni-Cote Hi Lite Render is suitable for all large and small, commercial and residential building and construction projects. It is ideal for building up rough brickwork or filling of rake joins where a skim coat is not suitable. Suitable for a one-coat or two-coat application on all suitable brick or block, masonry surfaces both inside and out.

PRODUCT FEATURES

• Ideal for uneven masonry surfaces
• Trowels on easily, smoothly and thickly
• High build in a single pass
• Is polymer-modified for strong adhesion to surface
• Is more waterproof than conventional render
• Just Add Water - less margin for errors
• Is ideal for renovation works or over new surfaces
• Consistent quality

SPECIFICATIONS

• Size: 14kg bags
• Coverage: 2 - 4m²
• Workable thicknesses: 6mm to 15mm approximately (up to 30mm with successive coats)
• Minimum curing time 24hrs between coats
• Suitable for: New and/or old brick, cement blocks
• Apply with: Spray or trowel

ABOUT THE COMPANY

Unitex are manufacturers of cladding, renders, textures, mouldings and columns. Founded in 1983 when two expert, solid plasterers joined forces with an experienced, industrial polymer chemist, Unitex has a strong technology base from the beginning, yet at the same time, a very functional focus.

As Australia's most innovative manufacturer of specialty exterior wall materials, Unitex has a product range including external wall polystyrene cladding, specialty renders, applied texture finishes, masonry paints, mouldings and columns.