Carter Holt Harvey Wood Products Australia

Carter Holt Harvey Wood Products Australia

Engineered to perform, hySPAN Structural LVL is available in two complementary ranges delivering both softwood and hardwood alternative beam solutions. hySPAN PROJECT and hySPAN+ are easy to work with using traditional building tools and are clearly branded for easy identification and your guarantee of quality.

FEATURES

hySPAN PROJECT is the product you know and trust and is now more affordable  +  hySPAN+ offers an alternative to F17 hardwood beams in traditional sizes  +  Terminator – cost effective termite protection with 25 year guarantee for peace of mind  +  Sourced from managed plantation forests for green star points (FSC ‘Chain of Custody’ certified upon request)  +  Fully supported by CHH Woodproducts technical expertise  +  Start specifying today with new and improved designIT software

SPECIFICATIONS

Powered by designIT® software, a powerful tool for building practitioners to quickly and simply design more economical floor, wall and roof member layouts. Optimised sizing from the full hySPAN range can be obtained using the free designIT software. Free download www.chhwoodproducts.com.au/designIT

Office / Contact Details

821 Pacific Highway Locked Bag 4025 Locked Bag 4025 CHATSWOOD NSW 2067 Australia

t: 1300 658 828f: 1800 891 881

Update these details

Videos from Carter Holt Harvey Wood Products Australiatop of page

Products by Carter Holt Harvey Wood Products Australiatop of page

  • Carter Holt Harvey's IRONwood Outdoor Decking enlarge

    Carter Holt Harvey's IRONwood Outdoor Decking

    Carter Holt Harvey's IRONwood outdoor decking is a cost effective, naturally beautiful and environmentally sustainable solution for domestic and commercial uses.  Proudly Australian made, the range and its superior finish is highly durable and unique, with options to be finished in paint, stain or particular colour schemes.  IRONwood is a lightweight and highly versatile wood that is easy to handle and can be installed with conventional hand or electric saws without the need for specialist fixings.  Absorbing less heat than masonry or composite products, IRONwood is great for walking, with a comfortable texture and temperature under foot.  The superior finish of the decking boards may also be used to build screen in gardens, as an aesthetically pleasing shading and partitioning device.

    FEATURES

    Made from renewable Australian plantation pine grown  +  Durable  +  Superior finish  +  Cost effective  +  Easy to install  +  Lightweight  +  No need for specialist fixings  +  Colour matching available  +  Range of paints and stains available  +  May be saturated in protection oil alone

    SPECIFICATIONS

    Two sectional sizes available  +  70 x 22mm  +  90x22mm  +  Available in a range of lengths, 2.4m to 5.4m

    PRODUCT RANGE

    IRONwood Fencing  +  IRONwood Landscaping  +  IRONwood Decking

    Contact  | Website
  • SHADOWclad by Carter Hold Harvey Wood Products

    SHADOWclad by Carter Hold Harvey Wood Products

    For architects, designers and builders in search for plywood cladding that is strong, durable and aesthetically pleasing, Carter Holt Harvey's SHADOWclad is the answer. The light weight material is easy to install and is available in structural and decorative form to suit any purpose. Uniqueness is always maintained with an extensive range of finishes available, with the choice of primed or unprimed plywood finished with staining, acrylic paint or semi-transparent coating systems. The cladding is also made from sustainably managed plantation timber with an FSC Chain of Custody certification presented on request and is suitable for all scales of buildings, large or small, residential or commercial.

     

    FEATURES

     

    FSC Chain of Custody Certificate available on request

     

    SPECIFICATION

     

    1200mm X 2440mm + 1200mm X 2745mm + 1200mm x 3050mm

     

    PRODUCT RANGE

     

    SHADOWclad groove + SHADOWclad texture

    Contact  | Website
  • PLYFloor enlarge

    PLYFloor

    Carter Holt Harvey's PLYfloor is a sturdy, pre-sanded, durable panel which has been made available in a wide range of thicknesses suitable for use in non-structural as well as structural flooring. This product contains long edges (machine-grooved), with a plastic tongue, thereby forming an extremely tight and sturdy tongue and groove joint between sheets. PLYfloor can be seen these days in factories, offices, garages, transportable homes, truck decks, hotels and motels, buildings, farms, sports stadiums, and houses. PLYfloor installations can also be made to order for custom applications and specialty uses, including especially high traffic areas, heavy industrial loads, even wet and external applications. *FEATURES* High stiffness + FSC certified + Tested as per AS/NZ 2098.11 + Withstands floor heating systems + Can be H3 treated to use in wet areas and also for external uses *SPECIFICATIONS* Australian/New Zealand standard: AS/NZ 2269 EWPAA JAS/ANZ accreditation

    Contact  | Website
  • EcoPly enlarge

    EcoPly

    ECOply structural plywood is a layered panel consisting of radiata pine veneers produced from completely renewable plantation pine. ECOply is also very versatile, strong and durable, making it suitable for long-term applications. Projects that use ECOply are well on the way to meeting requirements for the Building Code of Australia with regards to Energy Efficiency, Moisture, Fire, and Structure. Apart from heavy duty industrial applications, ECOply can replace traditionally unsustainable plywood for use in all transport, materials handling, and packaging applications.  

    FEATURES

    Bonding with phenol formaldehyde + Extremely durable + Easy to use + Easy to transport  

    SPECIFICATIONS

    Grade and quality compatible with AS/NZS 2269, 0:2008 and PAA JAS/ANZ accreditation

    Contact  | Website
  • Arreis Fire Retardant MDF from Carter Holt Harvey

    Arreis Fire Retardant MDF from Carter Holt Harvey

    Carter Holt Harvey's Arreis is a range of fire retardant MDF which is economic, easy to use and more importantly user friendly. Arreis FR MDF is classified as a Building Code of Australia, Group 1 fire retardant, and features a retardant element added during the milling process to give it a low flame spread and smoke development rate.  Suitable for a wide range of constructions, Arries FR MDF features uniform fibres which eliminate splintering for easy and safe precision cutting and shaping.  As an MDF, Arreis is made of 100% recycled wood aggregate and features a formaldehyde free, low VOC adhesive ideal for the health of installers and the environment.   For a safe, economic building material that is fire retardant and easy to cut, look no further than the Arreis Fire Retardant MDF sheet.

    FEATURES

    Compliant with Group 1 specifications A2.4 C1.1 section 3(c) of Building Code of Australia+ Easy to cut + Formaldehyde free + Generic sheet size + 100% recycled wood aggregate.

    SPECIFICATION

    1245 x 2465 mm sheet size + available thicknesses: 6, 9, 12, 16, 18, 25mm + density: 769 kg/m³ + thickness: +/- 0.127mm + Formaldehyde: <0.3mg/l.

    Contact  | Website
  • FORMrite

    FORMrite

    FORMrite is an untreated plywood that is used to support the forming process of concrete elements in a structure. FORMrite through its composition is the ideal panel for the forming of concrete, due to its attributes such as finish, moisture resistance and economy. FORMrite by Carter Holt Harvey is a plywood panel that is composed of graded Pinus radiata veneer, which are held together with phenol formaldehyde resin and overlaid with a hard durable resin impregnated paper. It is essential that the surface of the plywood is smooth, as it is mirrored in the formed concrete, FORMrite will give a class 2 finish on the first pour. In addition to its immaculate finish, FORMrite through its A Type marine bond is able to prevent the aggregation of water on the surface, which not only distorts the plywood but the finish of the concrete. Furthermore the Phenolic adhesive gives it its properties of durability and re usability. For an easy to install, highly durable, light and superior concrete finish look no further than FORMrite.

    FEATURES

    Significant number of reuses + can be used in modern optimised form systems + suits a range of frame spacings, concrete slab thicknesses, and surface tolerances + lightweight nature + available FSC ‘Chain of custody’ on request for Green Star credits.

    SPECIFICATION

    Adhesive: Phenolic + Bond: Type A (Marine), AS/NZS 2098 and AS 2754, Length and Width: +/- 1.5mm + Thickness: Tolerance +/- 4% (Overlay not included).

    Contact  | Website
  • PYNEboard

    PYNEboard

    PYNEboard is particleboard by Carter Holt Harvey that excels through its properties of uniformity, resistance, and economy. PYNEboard is composed of moderated and renewable plantation pine bonded together by special resins which give it strong moisture resistance. Unlike traditional particle board which is susceptible to moisture and deformation, PYNEboard has minimal swelling when immersed in water, and when drying out the particle board returns to its original state. Its uniformity through its composition gives it its property of consistent strength throughout the board, along with no definably grain providing a homogenous finish necessary for laminates or paints. Its uniform nature also allows for its easy cutting, as it is exceedingly easy to machine, PYNEboard is ideal for: building panels, benches , shelves and partitions. For an economic particle board panel that is uniform, easy to machine, and superior in quality, think PYNEboard.

    FEATURES

    Can be laminated, painted and veneered + uniformity in strength + water resistance + ideal for production machining.

    SPECIFICATION

    Thickness: 9mm – 33mm + tolerances: length and width normal sizes: + 50mm, -0mm + thickness: <12mm ± 0.2mm on nominal thickness, >12mm ± 0.3mm on nominal thickness, + edge straightness: <2mm per metre length + flatness: 1.5mm per length.

    Contact  | Website
  • PYNEpanel

    PYNEpanel

    PYNEpanel is a range of particleboard sheets that are designed to be used in interior spaces, for the purposes of shelving and furniture. PYNEpanel’s most distinctive feature is its surface of decorated white paper on both sides along with its edge, which provides a smooth seamless finish to finished products. Furthermore PYNEpanel particleboard’s distinct quality of uniformity in its elements, means that the board has an even distribution of strength, and no distinguishing in grain, unlike its natural wood contemporaries. The lack of grain also means that there is far less likely to be wastage, in the manufacturing process. The PYNEpanel range comes in 3 variations: PYNEpanel Thick Edge: is a white particleboard with a 1mm PVC edge that provides greater resistance to damage, PYNEpanel Standard, is a double sided particleboard panel that has a 0.3mm melamine paper edge, and PYNEpanel 32 are pre drilled at 32mm in 2 parallel rows , which enable shelves to be fixed at any level between the two rows. For quality particleboard for interior furniture, shelves, and storage look no further the Carter Holt Harvey’s range of PYNEpanels.

     

    FEATURES

    Range of particleboard panels to suit construction + perfect for interior furniture + simplistic matte design + minisation of wastage + comes in a variety of thicknesses

    SPECIFICATION

    Length and width of nominal sizes: length + 3mm \, -0mm width +/-1.5mm + thickness: +/- 0.3mm + squareness: 2mm per metre length of diagonal + edge straightness: 1.5mm per metre length.

    Contact  | Website
  • COLOURpyne enlarge

    COLOURpyne

    Owing to Carter Holt Harvey’s melamine technology, COLOURpyne is a scratch-resistant, tough surface designed especially for various vertical surfaces such as pantries, kitchen cabinets, wardrobes, vanities, mobile storage units, furniture, general shelving, and more. The COLOURpyne range features many classic and contemporary prints from special and solid colors to authentic woodgrains. COLOURpyne is also available in two distinct surface finishes, Décor and Velvet, effectively doubling the colour range options.

    FEATURES
    Not suitable for wet applications + Hot soapy water used for removing stains and spills + Sandpaper, copper cleaner pads, wire wool scourer pads, or abrasive cleaners must not be used + Regular cleaning done with damp clean cloth + Rigid edgetape or melamine used for finishing

    Contact  | Website
  • Laser Frame Untreated

    Laser Frame Untreated

    LASERframe Untreated is a structural timber used for commercial and residential framing. The manufacturing process of LASERframe Untreated involves kiln drying and machine stress grading to ensure regularity, strength and long-term durability. Pine framing has always been the preferred building method in Australian housing construction, thanks to its design versatility, high strength to weight ratio, and suitability over a wide range of climates and locations.

    FEATURES
    Machine stress graded after kiln planning and drying as per requirements of grade timber + Graded and tested according to Australian Standards + High durability + Easy usage + Building material readily available

    Contact  | Website
  • All Seasons enlarge

    All Seasons

    ALLseasons is one of the best choices for outdoor load bearing applications such as deck stairs, pergola rafters, decking bearers, decking and pergola joints. Treated and graded as per Australian Standards, ALLseasons is resistant to attack by fungi and termites, ensuring the long-term performance of the product and any project in which it is used. ALLseasons products are seasoned and kiln-dried for consistent sizing and dimensional stability and are produced from environmentally sustainable plantation pine. ALLseasons is also extremely versatile: it can be cut and shaped using conventional tools, and then finished to match any color scheme with just a lick of paint.

    SPECIFICATIONS
    Graded as per AS 2858 Timber
    Treated to ‘H3 Level Making’ for use above ground
    Treated to ‘H4 Level Making’ if in touch with ground
    Treated as per NSW TMA, i.e. Timber Marketing Act
    Treated as per 1604.1 Specification with regards to preservative treatment
    RANGE
    Treatment available in H3, H3 LOSP, and H4 Hazard Classes
    Available in grades F5 and F7

    Contact  | Website
  • Ironwood Fencing enlarge

    Ironwood Fencing

    IRONwood fencing products manufactured by Carter Holt Harvey create a chic yet practical fence installation for any landscape décor. Treated plantation pine is used in the production of this range, which covers all aspects of the fencing project from capping to posts, rails, pilings, and pickets. IRONwood pickets are perfect for front fencing, while palings are the preferred choice for boundary fences. Finish the job with IRONwood capping to protect the palings and posts from weathering, and voila: a stylish, durable, cost-effective fence.

    FEATURES
    Protection against fungal and termite attack + Cost-effective option for front and boundary fencing + Extremely safe + Can blend in to environment + Can be painted as per choice

    SPECIFICATIONS
    Available in Hazard Classes H1, H2, H2F, H3, H4, H5, and H6
    Typical treatments include CCA, ACQ, LOSP, Permethrin, Bifenthrin, and Liquid Boron.

    Contact  | Website
  • Ironwood Landscaping enlarge

    Ironwood Landscaping

    IRONwood landscaping materials such as logs and sleepers are perfect for constructing contemporary as well as cost-effective landscaping projects that are bound to last for many years. IRONwood landscaping timber aims to give 100% confidence, based on Carter Holt Harvey’s well-known reputation for quality Australian construction, and the knowledge that the product has been sourced from environmentally sustainable pine plantations.

    FEATURES
    Treated against fungal and termite attack + Safe and easy to use + Possesses beauty of nature + Superior appearance + Made in Australia

    SPECIFICATIONS
    Available in Hazard Classes H1, H2, H2F, H3, H4, H5, and H6
    Can be treated with Liquid Boron, LOSP, CCA, ACQ, Permethrin, and Bifenthrin

    Contact  | Website
  • Pinex Roundwood enlarge

    Pinex Roundwood

    The PINEXroundwood post and rail system has been proved to be durable and strong, making it the ideal product for use in agricultural structures such as stock enclosures, livestock chutes, trellising, and fencing, to name a few. It is also highly suitable for rural fencing, stock enclosures, storage sheds, barns, feeders, rural trellising, and many other applications. PINEXroundwood can be installed and fixed quickly and easily, and there is no need to set foundations. The PINEXroundwood post range includes two diverse finishes, two different treatments, and has a broad range of lengths to choose from.

    FEATURES
    Life-span of around 40 years + Strong, light, and rigid + Creosote posts can perform under severe conditions like flooding and bush fires + Virtually resistant with respect to damage + Cost-effective

    SPECIFICATIONS
    Treated to H4 level to be suitable for in-ground, outdoor use
    Posts treated with creosote or CCA
    Rails treated with creosote

    Contact  | Website
  • StuctaFlor enlarge

    StuctaFlor

    STRUCTAFlor is a structural grade particleboard sheet flooring which is being used in residential and domestic buildings, particularly in platform construction and fitted floor construction projects. The timber surface is impregnated all over with wax, and an edge wax seal helps to minimize moisture ingress into the timber. Designed with the knowledge that ease and efficiency during construction is important to an overall efficient building process, the different timber thicknesses of STRUCTAflor can be easily identified by simply looking at the color of the tongue. STRUCTAFlor sheeting has been designed and manufactured to have maximum resistance against bad weather and the extremes of the Australian climate, as well as Australian construction standards,.

    FEATURES
    Cut sheets protected against moisture via in-built moisture protection + Environmentally sustainable + Produced from Australian plantation pine + Moisture is prevented from entering due to edge wax seal

    SPECIFICATIONS
    Thicknesses of sheets as per tongue color: Red: 22 mm, Blue: 25 mm, yellow: 19 mm

    Contact  | Website
  • TermiFlor enlarge

    TermiFlor

    TERMIflor is a termite protected, structural grade particleboard sheet flooring which can be used for residential buildings as well as domestic flooring applications. This product is also suitable for platform construction, where the floor is laid before wall erection. Fitted Floor Construction can also be carried out effectively through TERMIflor. This product proves to be a superior underlay surface for every floor covering, including ceramic, vinyl, slate, carpet, quarry, and parquet.

    FEATURES
    In-built protection against moisture for cut sheets • Wax impregnation all over • Environmentally sustainable • Access to moisture minimized by edge wax seal

    Contact  | Website
  • R-Flor enlarge

    R-Flor

    R-Flor, or Radiant Barrier Flooring, makes for a technically superior suspended timber floor system that meets energy-efficient design requirements. The basic purpose behind designing R-Flor is to provide thermal comfort. The product comes in laminated form, with metalised foil on the underside of the board, thereby significantly reducing radiative heat transfer towards suspended timber floors. This improves flooring systems overall R-value, by compensating for heat loss from an internal room to the exterior spaces. R-Flor therefore keeps the occupants warm, while also dramatically reducing heating costs and energy consumption throughout the home.

    FEATURES
    Increases floor systems overall R-value + Improves thermal comfort + Reduces consumption of energy + Easy and fast installation, saving money and time + 25-year guarantee re: protection against termites

    SPECIFICATIONS
    Thickness: Yellow: 19 mm, red: 22 mm, Blue: 25 mm

    Contact  | Website
  • Plygroove

    Plygroove

    PLYgroove is a high-quality interior panel designed to give a conventional tongue and groove timber lining look. Plywood of this type is often specified for all manner of interior design applications, from elaborate period homes right through to contemporary settings. PLYgroove has proven suitable for a wide range of surfaces and linings, including ceiling lining, internal lining, feature walls, furniture and soffits, commercial interiors, and more. This product combines plywood strength with a decorative aesthetic grooved finish, while its construction from FSC certified Plywood means the panels are also hard-wearing and impact resistant.

    FEATURES
    Lightweight + Easy installation + FSC certified plywood is used + Impact resistant + Hard-wearing

    SPECIFICATIONS
    Tested for Early Fire Hazard Properties
    Meets AS 3660 standards

    Contact  | Website
  • Style Wood enlarge

    Style Wood

    STYLEwood lining boards and dressed boards are ideal for indoor DIY projects such as shelving, furniture, and other decorative uses. The smooth texture of STYLEwood simplifies the tasks of working and finishing the project into a diverse range of ready-to-use projects, and the material is lightweight, simple to cut, stain, and paint. There is a wide spectrum of finishes available, so a STYLEwood product can be selected match any décor: traditional or contemporary, decorative or commercial. STYLEwood dress boards are ideal for applications where aesthetics are of prime importance, and are divided in to 3 grades: Standard Grade, Merchantile Grade, and Run of Mill Grade, all of which are made from completely renewable radiata pine.

    FEATURES
    Produced from Australian plantation pine + Complies with Australian Standard 4785 + Assured consistent appearance + Suitable for aesthetic applications: bookshelves, blanket boxes, bedside tables, etc. + Surface finishing and/or docking might be essential for removal of trenching, sap stains, or knots. + Drawer linings can be made out of Merchantable Grade.

    Contact  | Website
  • R-Flor Radiant Barrier Flooring enlarge

    R-Flor Radiant Barrier Flooring

    The next generation flooring, designed for thermal comfort and energy efficiency.
    R-Flor® integrates a high reflectance (low emittance) metallised foil with particleboard flooring to significantly reduce the radiative heat transfer across a suspended timber floor and subfloor air space to deliver an improvement in the ‘Total R-Value’ of the flooring system, yet enables flooring to be installed in the conventional manner delivering speed and ease.

    Feel the difference. Make a difference.
    · Increases overall R-Value of floor system
    · Improves thermal comfort
    · Reduces energy use
    · Greenhouse & environmentally friendly
    · Fast & easy installation

    Sizes
    R-Flor® Yellow Tongue® 3600 × 900 × 19 mm
    R-Flor® Red Tongue® 3600 × 900 × 22 mm
    R-Flor® Blue Tongue®* 3600 × 600 × 25 mm

    • Made to order

    For more information on R-Flor visit:
    www.chhwoodproducts.com.au/r-flor

    Contact  | Website

News by Carter Holt Harvey Wood Products Australiatop of page

Brochures by Carter Holt Harvey Wood Products Australiatop of page

  • Carter Holt Harvey product overview Carter Holt Harvey product overview