Dry-treat (Australia) Pty Ltd

View products
View news
View brochures
Share |

HANAFINN Rejuvenata™ is Dry-treat's gentle daily cleaning solution for natural and engineered stone countertops. Applied like a polish, Rejuvenata's™ invisible sealer makes surfaces more stain repellent and even easier to clean overtime, resulting in a countertop that becomes simpler to maintain with daily use. Whether in commercial or domestic applications, Rejuvenata™ can be used on natural stone, engineered stone, lacquered timber, stainless steel, laminate and polished concrete countertops. For the environmentally conscious, Rejuvenata™ also qualifies for LEED 2009 IEQ Credit 3.3: Green Cleaning – Purchase of Sustainable Cleaning Products and Materials 1 Point. To achieve an even higher finish, seal stone countertops with STAIN-PROOF Original™ or META CREME™.

FEATURES

Gentle on surfaces + Invisible sealer + Repeated use makes surfaces stain repellent + Qualifies for LEED 2009 IEQ Credit 2.2: Green Cleaning – Purchase of Sustainable Cleaning Products and Materials 1 Point

SPECIFICATIONS

16 fl. oz. (473 mL) plastic spray hand pump container

PRODUCT RANGE

HANAFINN Rejuvenata concentrate™ + HANAFINN X-Duty Graffiti Kleena™ + HANAFINN Skavenja™ + HANAFINN Oxy-Klenza™ (available soon)

Office / Contact Details

PO BOX 551 St Leonards NSW 1590 Australia

t: 02 9954 3211f: 029-954-3162

Update these details

Products by Dry-treat (Australia) Pty Ltdtop of page

Hanafinn SKAVENJA™ non-acidic multifunction cleaner by Dry-treat

Dry-treat's newest product, the Hanafinn SKAVENJA™ is a non-acidic gel that removes grout haze, efflorescence and rust stains. SKAVENJA™ works as a multifunction cleaner by detecting and dissolving cement grout, efflorescence, rust marks or any other contaminant. Once dissolved, the contaminants can be rinsed away from acid sensitive surfaces like marble, limestone, travertine and concrete. The SKAVENJA's™ gel consistency makes it a perfect cleaner for horizontal and vertical porous surfaces in any commercial or residential setting.

FEATURES

Non-acidic multifunction cleaner + Effective efflorescence, grout haze and rust stain remover + Scavenja can be undiluted or dissolved 1 : 5 parts water + No need for strong acid cleaning + Gel ideal for cleaning horizontal and vertical porous + Multifunction cleaner for marble, limestone, travertine and concrete.

PRODUCT RANGE

SKAVENJA™ 948 mL in a plastic container + SKAVENJA™ 3.79 L in a plastic container.

Contact | Website
About Dry-Treat (Australia) Pty Ltd

Dry-Treat (Australia) Pty Ltd manufactures a wide range of specialist protective surface treatments and sealants for use on almost all indoor and outdoor surfaces including brick, concrete, paving, marble, porcelain, limestone, sandstone, travertine, slate and terracotta. Dry-Treat employs fully qualified engineers who understand the process of protecting building materials, so their understanding of engineering and chemistry sets their products apart from market alternatives competitors. Dry-Treat products are made and packaged to international quality standard ISO 9001:2000 in Rydalmere (Australia) and Charlotte (USA) and dispatched from one of Dry-Treat's modern warehouse facilities in Wetherill Park (Australia), Atlanta (USA ) or Leighton Buzzard (UK).

Contact | Website
META CRÈME™ Impregnating Sealer

Dry-Treat's META CRÈME™ is a next generation invisible and breathable impregnating sealant for protecting natural stone, pavers, grout, concrete, masonry and tiles. Dry-Treat had two main goals for META CRÈME™: firstly, create a product with excellent performance, durability and protection that can surpass all existing standards; and secondly, an environmentally responsible product. With both goals achieved, META CRÈME™ Impregnating Sealer is ideal for indoor and outdoor usage on bathrooms, kitchens, patios, walls, and entertainment areas.

FEATURES

Retains natural colour and finish of the surface + Super oil and water repellency for superior stain protection + Easy one coat application + Used in indoors and outdoors + Alkali resistant and won’t break down when in contact with cement based materials + Can seal hairline cracks up to 0.3 mm ( 0.012 inches) + 15 year performance warranty

Contact | Website
Enhance-Plus Instant Dry (EPID) Anti-Graffiti Sealant

Enhance Plus Instant Dry (EPID) is a professional breathable and invisible surface sealer that protects against graffiti. EPID can be used on natural stone, metals and engineered stone as well as Plexiglas, glass, plastics and tiles. The product is suitable for a wide range of applications for indoor and outdoor use including kitchen counter tops, bathrooms, dining rooms and entertaining areas. The sealant can also be used on bus shelters and public and commercial areas. EPID is a fast drying and deep enrichment of natural colour, and greatly lessens the appearance of scratches associated with wear and vandalism. *FEATURES* EPID repels water and oil based stains + Easy to clean + Makes scuff marks easy to remove from any textured tiled floors + Makes the surface more resistant to acid etching *SPECIFICATIONS* Product includes + Ready to use container with application rate of one litre per 5 to 15 sq feet. + Applied when temperature is 5 to 35 degree Celsius + 30 percent active content in low molecule weighted solvent

Contact | Website
Dry-Treat Sealer Features: Chemical Reaction

Dry-Treat impregnating sealers are engineered molecules, which gives them their superior properties and unique benefits. Main molecules have two main parts with different properties: part of the molecule is hydrophobic which repels oil and water, whilst other sealers are attracted to water. The sealer is applied to the surface and starts to react with moisture in the air along with the material. This reaction can cause the sealer part molecules that are attracted to water to break off leaving a changed molecule behind. Later on in the reaction process, it breaks the bonds between the masonry and the attached oxygen and hydrogen atoms and bonds to the lattice. Essentially, the treatment becomes part of the material itself. This chemical bond is strong, holding the masonry together with a longer lifespan than other sealers.

Contact | Website
Dry-Treat Sealer Features: Salt Resistance

Freeze thaw is a phenomenon that occurs when water fills up the surface pores of a porous material. Dry-Treat products are salt resistant, which means they provide protection against salt attack and freeze thaw damage. Salts must be in water in order to move through a porous building material. Ions in salt water are surrounded by a shell of water molecules, and when water freezes, it expands and spalls the surface. When Dry-Treat sealer is applied, it offers resistance to salt attack: the building material repels the water and the dissolved salts which can cause the damage.

Contact | Website
Dry-Treat Sealer Features: Breathability

Dry-Treat Sealers treat surfaces with special impregnators and through this maintain their breathability. Dry-Treat sealers attach to the building material molecular lattice where it can repel liquids. Dry-Treat special liquid repelling sealing molecules are almost thousands of times smaller than other molecules in standard silicone resin or fluoro-polymer type impregnators. These products also block the pores and so the surfaces are treated with its impregnators, allowing them to retain breathability after treatment. Water or oil is repelled and the water vapour evaporates out.

Contact | Website
Dry-Treat CONCRÈME™ low VOC permanent bonding silane

CONCRÈME™ by Dry Treat is a specialist civil engineering product that uses the ultimate technology for protecting engineering concrete and masonry from water damage. CONCRÈME™ is a revolution: the world’s only low-VOC permanent bonding silane that passes world’s best low VOC silane standards. Permanent bonding silanes have been regularly used across the world for more than fifty years as the best protective sealer for large concrete structures especially in salt water. However silanes produce VOC emissions during the bonding process and so their use is limited or banned. *FEATURES* Maintain surfaces looking good for longer + Non-film-forming deep penetration + Very alkali resistant + Powerful resistance to weather and traffic + Suitable for a wide variety of applications, including marine infrastructure such as wharves and jetties, road and rail bridge decks, building facades, car parks and swimming pool surrounds. It is an ideal product for the preservation of infrastructure.

Contact | Website
HANAFINN Ole Repella™ Technology

HANAFINN Ole Repella™ Technology is an environmentally friendly oil penetrating, cost effective repellent that resists spills from food items and reduces ongoing maintenance. It can be used on driveways, swimming pool surrounds, eating areas and patios. Ole Repella is suitable for cement bricks, clay, terracotta tiles and grout surfaces. The product protects tiles from the damage caused by any stains. It can be applied in both indoor and outdoor surface areas and makes the surface easy to maintain and clean for a long period of time. FEATURES A sealer for engineering concrete and stones + Superior water and oil repellent + Provides superior penetration with a longer life span + Versatile applications

Contact | Website
Dry-Treat 100N Sealant

Dry-Treat 100N is an impregnating, breathable and invisible sealer which protects engineering concrete from water and sodium damage. Through these products one can maintain a clean marble surface for extended periods of time. The products offer lasting protection for engineering concrete. Dry-Treat 100 N is suitable for a number of applications including, marine infrastructure bridges and jetties. It is also used in car parks, swimming pool areas and building facades. The product repels water and water borne chloride ion salts.

FEATURES
Keeps the original surface look + Can minimise moss growth Excellent chloride ion salt screen + Ideal for marine and pool areas + Protect tiles and marble against any weather conditions

SPECIFICATIONS
100 per cent active ingredient + Alkaline resistant + 30 year performance warranty + Each coat of 0.3 litre per square mile means a total of one litre for per 1.66 sq m + 20 and 200 litre steel drums

Contact | Website
ENHANCE-PLUS Sealer

ENHANCE- PLUS Sealer is a penetrating and breathable sealer which enriches the colour of natural stone, grout, pavers, tiles and concretes. This sealer hides any scratches and imperfections. This sealer product is a breathable semi-surface treatment which offers a lasting enrichment of colour and water based stains protection for terracotta and other tiles. It comes in a deeply enriched natural colour, so tiles look good for a longer period of time. Such products can treat indoor as well as outdoor surface tiles, is easy to maintain, and is suitable for alkaline and neutral substrates.

FEATURES
Makes the surface more resistant to acid etching + Repels any stain and soil for easy cleaning + Protects against salt and such efflorescence + Backed by 5 year performance warranty

Contact | Website
Dry-Treat X-DUTY Cleaner

X-Duty is a multipurpose, non water based, non-acidic cleaner used on concrete, cast stone, limestone, marble and on tiles to lift deep seated stains and graffiti from the surface. X-Duty is excellent for the removal of factory applied wax coating found on porcelain tiles, and for a variety of maintenance applications like building facades and swimming pool surroundings. The product is suitable for both indoor and outdoor applications and is easy to use with low odour.

FEATURES
Multipurpose cleaner + Non-water-based, non-acidic + Typical application rate is 20ml per 100 × 100 mm surface mark + Is a mixture of 50 percent active content in pyrrolidone mixture

Contact | Website
Dry-Treat SP Cleaner

Dry-Treat SP Cleaner is a water based concentrate that maintains and cleans any sealed surface. This product is equipped with advanced processing techniques, with a neutral pH for everyday cleaning of stone bench tops and floors, cleaning the dirt and grime off stone and leaving the surface fresh and sparkling. It also reduces streaking that can commonly occur with natural stone surfaces. S P Cleaner has a small amount of penetrating sealer which is used by the marble man. This can ensure that every time the cleaner is applied, the sealer in the stone tops up offering more protection.

FEATURES
Water-based + Neutral pH + Streak-free clean + Suitable for use on engineere concrete and marble + Maintain and cleans sealed surfaces

Contact | Website

News by Dry-treat (Australia) Pty Ltdtop of page

Have a sealing problem? Dry Treat has the solution.
Dry-Treat manufactures innovative sealers for porous building materials, including natural stone, brick, paving, tiles engineering concrete and grout....