Bosch Commercial 32 Series
Bosch is proud to present the latest in commercial water heating, the Bosch 32 Series. The 32-litre commercial units are specifically designed for Australian and New Zealand commercial use. Options include one unit through to a fully manifold system. The Bosch commercial units have all your applications covered. The 32 Series has a coated copper heat exchanger to prevent corrosion and deterioration and the internal copper piping is 25% thicker than residential models to extend the life of the product. In addition, the Quick Connect Cord (KMQC0703339) is available for easy installation of 2 units manifolded for heavier applications.
The Bosch 32 and 32Q will, with a controller attached, reactivate within 1 minute of the power coming back on after a power outage and go back to the settings that it had before the loss of power (great for sporting complexes). Both the 32 and 32Q feature the same physical dimensions. Antifrost comes as a standard option with the 32 series.
Internal / External Applications - Unique to Bosch
The Bosch units can be installed either internally (using the Bosch flue kit), or externally with the additional Bosch accessory, Vent Cap (KMVC100), making the Bosch 32 series the most flexible units on the market.
Temperature Controllers
The 32 series are most effective when coupled with the optional temperature controllers. The controllers offer fingertip water temperature control, accurate to single degrees. The commercial controller gives you the advantage of not having to mix hot water with cold water as this is done automatically inside the unit.
Main Remote Controllers - RCM3211
- Time Display
- Accurate temperature setting, e.g. 40ºC
- Circulation mode (32Q only)
- Controller is standard with 32Q model
Sub Controller - RCS3211
- Up to 3 temperature controllers can be fitted to the 32 and 32Q, i.e Main Remote Controller and 2 Sub-Controllers
The unique features of the Bosch 32 include:
• Delivers up to 32 litres of hot water per minute
• Available in
• Internal* and External installations
• 4.8 stars
• Wall hung
• Minimum pressure - 200 kPa
• Minimum flow rate - 3.5ltrs per minute
• Capacity range 3.5 – 32ltrs minute
• Direct ignition
• Temperature settings – 37-48, 50, 55, 60, 65, 70, 75, 80º C, factory set at 60º C
• Safety devices – flame rod, thermal fuse, pressure relief valve, lightning protection device (ZNR), electric leakage prevention device, overheat prevention device, freezing prevention device, fan rotation detector
• 25 degree rise @ 32ltrs per minute
• Compact design
• Easy installation
The Bosch 32Q has all the features of the 32, PLUS...
• When used on a ring main, an internal pump circulates water around your house to give you hot water at your taps when you need it
• Circulation Mode – Main controller has a built in timer for recirculation pump
• Main remote controller – (RCM3211) included as standard with KM32111WHQ (NG/LP)
*Internal 32 Series requires flueing (available at any plumbing outlet)